SMC
SMC 30mm Crevasse Rescue Pulley
A lightweight and compact prusik minding pulley designed for crevasse rescue, alpine climbing, and mountaineering.
SMC 35mm Double Jigger Pulley
A well-built, small pulley that has plenty of capacity and performs well.
SMC Flex Pad Rope Protector
The flex rope pad is a thin plastic sheet that provides configurable rope management and protection.
SMC 50mm Prusik Pulley
The 50mm single PMP “prusik minding pulley” is a mid-sized option for those needing the unique features of a PMP. This pulley is one of the lightest UL certified pulleys meeting NFPA “G” general use.
SMC Mountaineering Figure 8
Easy to rig and handle when wearing gloves, this new compact and lightweight descender has smooth action on belay or rappel. Made with high quality aluminium for optimal strength to weight ratio. Hard coat anodized black for durability and extra resistance to wear and abrasion. Also available in anodized blue for those looking to add some colour to their gear rack.
SMC Aluminium Rigging Ring
The SMC Rigging Ring is the strongest aluminium ring of its size on the market.
SMC 60cm I Picket Snow Anchor
SMC snow stake recognized for excellence in performance and durability by the world renowned American Alpine Institute as one of their “Guides’ Choice” products.
SMC Vector Edge & Load Management System
The Vector Edge and Load Management System has been designed and engineered as a light-weight, portable tool for use in industrial, mountain and urban rescue environments. When combined with high strength – low stretch cord, quality life safety rope, lightweight pulleys and carabiners, the Vector provides rescuers with a versatile resource which can reduce risk and go virtually anywhere.
SMC Rescue StayK
Ground stakes made from unknown grades of pipe, rebar, or scrap iron are risky at best, yet they are extremely common in rope rescue. The SMC Rescue StayK is an engineered solution to the ground stake problem. The Rescue StayK system is versatile, accomodating, and by far the most effective, efficient, and reliable system available today.
SMC 50mm Swiftwater Pulley
A rescue pulley specifically designed for swift water rescue.
SMC Rescue 8
A traditional figure 8 design without ears machined from a solid aluminium bar This descender is hard-coat anodized to provide optimal resistance to abrasion and is therefore ideally suited for heavier duty or repetitive rappelling situations.
SMC Escape 8 (Mini 8)
The ultimate compact and lightweight figure 8 for emergency evacuation or other extreme lightweight applications.
SMC 50mm Double Prusik Minding Pulley
A mid-sized option for those needing the unique features of a double prusik minding pulley.
SMC 38mm Advance Tech Mate Double Pulley
This new pulley frame design is ideal for making compact haul kits. An integrated stainless pins help retain the rope when a rigged system is packed so that system can be pulled out and used immediately. Manufactured from high quality aluminium and anodized to help prevent corrosion. The Advance Tech Mate is the ideal compact pulley for technicians wanting to use the Advance Tech HX in a mini haul system. The Advance Tech Mate will support ropes diameters from 7mm up to 12.5mm.
SMC 30mm Jigger Rescue Pulley
The SMC double prusik minding pulleys have been designed to be compact, lightweight and cost effective. A key component of every rescue technician’s tool box, these pulleys provide tremendous versatility in the minimalist of ways.
SMC NFPA Rescue Swivel
A high performance swivel with silky smooth action and a beautiful finish and feel. Built around a heat-treated steel axle and a sealed high efficiency ball-bearing to ensure flawless rotation during even prolonged and difficult raises in severe rock, mountain and rescue conditions.
SMC 38mm Advance Tech HX Double Pulley
The SMC Advance Tech HX Pulley is a double pulley with an integrated cam that provides immediate progress capture without the need of prusik loops. The all in one frame and cam design presents a compact form factor. Stainless pins retain the rope when a rigged system is packed so that system can be pulled out and used immediately. Manufactured from high quality aluminium and anodized to help prevent corrosion. The Advance Tech HX is the most advanced pulley of its kind on the market today. The Advance Tech HX will support ropes diameters from 7mm up to 12.5mm. The Advance Tech HX is ideal for all rescue applications where a small mechanical advantage system is being utilized.
SMC 76mm Double Aluminium Prusik Minding Pulley
Large double pulley SMC prusik 70 mm gold
SMC Descent Control 8
Exceptional control when starting acceleration, rappelling speed, and deceleration for stopping are the most notable characteristics of the Descent Control 8 Descender. Light weight, tough, and stainless steel wear-resistant surfaces are other important features of this unique descender. The SMC Decent Control 8 performs extremely well in repetitive rappelling environments, such as rescue training or at climbing gyms.
SMC Grip Rope Grab
As the newest member of the SMC family this rope grab designed to work with virtually any rope you have in your gear bag. Every component of this rope grab is meticulously hand-finished contributing to the smooth, free action that is the hallmark of all SMC gear. Each one is 100% hand-inspected for functional characteristics before leaving our factory.
SMC Large Rigging Plate
SMC’s rigging plate is half the size of the bigger plates on the market yet it is just as strong. Features a single, large circular centre hole that accepts numerous connections simultaneously plus five oversized, ovalized holes. Holes are individually numbered to make it quick and easy to organize connections. All edges have been contoured so that they are easy on rope, webbing, carabiners and other connectors.