Rock Hardware

We have anchor options for recreational and industrial applications including both mechanical and chemical anchor bolts, with fittings available for abseiling, lowering and belay stations.

Filter
  • View as :

CT Bolt Hanger – 10/12mm

Multidirectional anchor plates made of AISI 316L stainless steel for outdoor use.

SKU: MASH
Ring Hanger

Fixe Ring Hanger – 10mm

A pair of ring anchors make an excellent anchoring system for any type of route. Ring Anchors should be placed on the same horizontal plane, at least 8” apart in good rock. A single ring anchor may be used in conjunction with other anchors. This unit should be placed in pairs or with another Top Anchor unit.

SKU: MASR1

CT Bolt Hanger (HCR) – 12mm

Multidirectional anchor plate made of High Corrosion Resistance (HCR) AISI 904L stainless steel with a Ø 12 mm hole, for use in ultra-corrosive environments.

SKU: MASH3

CT Glue-In Eye Bolt

Stainless steel anchors to be installed with chemical resin for use with high workload. Ideal for use in corrosive environment.

SKU: MASEB

Superclip Stick Clip

Rock Climbers who climb Sport routes will love the Superclip. It allows the user to clip the first bolt on a route, saving the climber from having to chance a potential ground fall.

SKU: MMSCB

CT Thunder Hammer Kit

Lightweight and well balanced rock-hammer, ideal for alpine climbing routes.

SKU: MOHT1

Fixe Belay Station

Incorporates two hangers, chain and ring as focal point.

SKU: MABSS
Webelet

Aspiring Dyneema Webelet – 13mm

13mm dyneema strop ideal for stitching up trad anchors quickly and easily.

SKU: SWD

CT Eye Round Pition

Soft steel zinc plated piton with U tip.

CT Eye Sharp Pition

Soft steel zinc plated piton with V tip.

CT Ring Hanger – 10/12mm

Multidirectional anchor plate made of AISI 316L stainless steel.

CT Universal Piton

Universal soft steel zinc plated piton with 45° angled head.

CT Universal Hard Piton

Universal hard steel piton with 45° angled head.

Superclip Stick Clip Kit – 150cm

Rock Climbers who climb Sport routes will love the Superclip. It allows the user to clip the first bolt on a route, saving the climber from having to chance a potential ground fall.

SKU: MMSCK

CT Glue-In Eye Bolt – Long

Glue-in anchor made of AISI 316L stainless steel Ø 12 x 105 mm, to be installed with chemical resin.

SKU: MASEB2

SMC Rescue StayK

Ground stakes made from unknown grades of pipe, rebar, or scrap iron are risky at best, yet they are extremely common in rope rescue. The SMC Rescue StayK is an engineered solution to the ground stake problem. The Rescue StayK system is versatile, accomodating, and by far the most effective, efficient, and reliable system available today.

SKU: SRS01

CT Glue-In Belay Station

Belay station entirely made of AISI 316L stainless steel.

SKU: MASES

Slackline Locker Ring – 6mm

Steel ring most commonly used in our slackline kit.

SKU: JR043

CT Carved Chocks (Nuts)

Light alloy anodized chocks, available in 11 sizes.

SKU: MNCT

Fixe Descending Ring – 10mm

Set up durable rappel stations or lowering stations with this trusty descending ring.

SKU: JR044

Fixe Reusable Triplex Bolt – 12mm

The Fixe Triplex bolt was designed specifically for rock climbing. Triplex takes anchoring a step further by eliminating the nose cone with a solid stud system. This design allows Easy Removal for replacement and consists of only 3 Parts.

SKU: MATRP

Replacement Cam and Hex Slings

Replace your old cam and hex slings with sewn 13mm Dyneema slings. This should be done at least every ten years; more often if the gear is heavily used or there is damage to the webbing.

SKU: XCS

Anchor Bolt – 10mm/12mm

10mm & 12mm AISI 316L stainless steel anchor bolts, with a single high adhesion expansion element.

SKU: MAT

Fixe Lowering Station

Lowering station designed for single pitch climbs and climbing gyms.

SKU: MASLS

Fixe Keyhole (Carrot) Hanger

Removable bracket for carrot bolts.

SKU: MASHK

Aspiring Equalising Focal Point

Ideal for equalising bolt anchors

SKU: YFAE1
Webelet

Aspiring Nylon Webelet – 16mm

16mm nylon strop ideal for stitching up trad anchors quickly and easily.

SKU: SW

CT Anchor Cams

Light alloy anodized friends, available in 8 sizes.

SKU: MPCT

CT Glue-In Eye Bolt with Ring

Glue-in anchor made of AISI 316L stainless steel Ø 12 x 75 mm, to be installed with chemical resin.

SKU: MASER
Sale
Alien Cam Techrock

Techrock Original Alien Cams

The original smallest camming device is back. Now made to exactly the same specs on the same machines by TechRock in Spain.

SKU: MPAT

CT Fifi Hook

Extremely functional hook in hardened steel.

SKU: MOFH1

CT Nut Tool

Hardened steel nuts tool, extremely lightweight, strong and equipped with an hexagonal housing for tightening the 17 mm nuts and with a bottle-opener loop.

SKU: MNTC1