If you need something a bit different from our standard product range, please feel free to contact us about customising a product specific to your needs.
Replace your old cam and hex slings with sewn 13mm Dyneema slings. This should be done at least every ten years; more often if the gear is heavily used or there is damage to the webbing.
Replacement belay loops made from 16mm webbing. We offer this service to extend the life of a harness that has a worn belay loop but is generally still in good condition.
Multidirectional anchor plates made of AISI 316L stainless steel for outdoor use.
Multidirectional anchor plate made of High Corrosion Resistance (HCR) AISI 904L stainless steel with a Ø 12 mm hole, for use in ultra-corrosive environments.
Stainless steel anchors to be installed with chemical resin for use with high workload. Ideal for use in corrosive environment.
Incorporates two hangers, chain and ring as focal point.
AISI 316L stainless steel anchor for outdoor use.
Glue-in anchor made of AISI 316L stainless steel 12 x 75 mm, to be installed with chemical resin.
Multidirectional anchor plate made of AISI 316L stainless steel.
Soft steel zinc plated piton with U tip.
Soft steel zinc plated piton with V tip.
Universal soft steel zinc plated piton with 45° angled head.
Universal hard steel piton with 45° angled head.
Glue-in anchor made of AISI 316L stainless steel Ø 12 x 105 mm, to be installed with chemical resin.
Belay station entirely made of AISI 316L stainless steel.
The Fixe Triplex bolt was designed specifically for rock climbing. Triplex takes anchoring a step further by eliminating the nose cone with a solid stud system. This design allows Easy Removal for replacement and consists of only 3 Parts.
10mm & 12mm AISI 316L stainless steel anchor bolts, with a single high adhesion expansion element.
Lowering station designed for single pitch climbs and climbing gyms.