Crazy Creek AirCliner Inflatable Chair

• Extra durable ripstop Nylon TPU welded construction.
• Carbon reinforced fiberglass support stays.
• 3-Dimensional weld with inner baffle design.
• Dual purpose – use as a sleeping pad too!  Works as a shoulder to hip sleep pad.
• Rubber + Nylon reinforced hinge points for added durability.
• Airs up in 5 or less breaths.
• C-Zero water repellent coating.
• Simple 2-way air flow valve.

Dimensions

• 92cm x 53cm (Flat)
• 41cm x 51cm x 5cm (Seat, Inflated)
• 51cm x 51cm x 5cm (Seat Back, Inflated)
• 7cm Diameter x 53cm (Rolled)

To Inflate

1. Make sure valve is pushed in fully before inflating (valve will click into place once sealed).
2. Pull up on the valve so the inner part only is open.
3. Blow into valve (typically five breaths) to inflate fully.
4. Close valve by pushing lid down completely.

To Deflate

1. Pull the entire valve open until the air comes out.
2. Using your arm, smooth the entire chair to push out the air.

To Roll

1. After all air is out of the chair, fold in half at the hinge point.
2. Hold chair sideways with the valve open, facing down and away from you. Begin rolling the chair as tight as possible towards the valve.
3. Once rolled, secure with the two closure straps and buckles and close the valve fully until you feel a click.
4. Leave out the side buckle/strap for easy carry handle.

Video